Call Us: +86-532-6673-9190 E-mail: info@tsingtaocnc.com
 |
| Quantity: | |
|---|---|
Technology introduction:
The bushings of the hot-dip galvanizing production line can be made of different material grades (ST4, ST6, ST12, T800) according to customer requirements or actual production conditions. Hot-dip galvanizing is a form of galvanizing. During zinc coating on steel, when the metal is immersed in a bath of molten zinc, the zinc forms a protective coating on the metal surface to prevent further corrosion. In the galvanizing process, some equipment components of the galvanizing line need to work in high-temperature zinc liquid or zinc-aluminum liquid for a long time, so a material that can withstand high temperature, corrosion resistance and wear resistance in the galvanizing process is required. Stellite alloy or T800 alloy perfectly solves this problem and provides a good solution for galvanized production equipment components.
1. Can be customized according to the customer's drawing requirements;
2. Linear tolerance: ±0.01mm; Angle accuracy: ± 1/2 °; Surface gloss: Ra1.6-3.2;
3. Wide range of applications. Suitable for various industries that require wear resistance, corrosion resistance and heat resistance;
Optional material:
Stellite alloy: ST1、ST4、ST6、ST6K、ST8、ST12、ST19、ST20、ST21、ST31、ST100、ST694、TP80、etc.
Tribaloy alloy: T400、T800、etc.
All materials are with material certificates, in compliance with international material specifications and material substitution levels.
Packaging:
Carton, Wooden Pallets, Polywooden case, or as your requirement.
Application:
Transmission equipment in corrosive environments such as petrochemical industry, pickling industry, hot-dip galvanizing industry, etc., replace conventional bearings.
Technology introduction:
The bushings of the hot-dip galvanizing production line can be made of different material grades (ST4, ST6, ST12, T800) according to customer requirements or actual production conditions. Hot-dip galvanizing is a form of galvanizing. During zinc coating on steel, when the metal is immersed in a bath of molten zinc, the zinc forms a protective coating on the metal surface to prevent further corrosion. In the galvanizing process, some equipment components of the galvanizing line need to work in high-temperature zinc liquid or zinc-aluminum liquid for a long time, so a material that can withstand high temperature, corrosion resistance and wear resistance in the galvanizing process is required. Stellite alloy or T800 alloy perfectly solves this problem and provides a good solution for galvanized production equipment components.
1. Can be customized according to the customer's drawing requirements;
2. Linear tolerance: ±0.01mm; Angle accuracy: ± 1/2 °; Surface gloss: Ra1.6-3.2;
3. Wide range of applications. Suitable for various industries that require wear resistance, corrosion resistance and heat resistance;
Optional material:
Stellite alloy: ST1、ST4、ST6、ST6K、ST8、ST12、ST19、ST20、ST21、ST31、ST100、ST694、TP80、etc.
Tribaloy alloy: T400、T800、etc.
All materials are with material certificates, in compliance with international material specifications and material substitution levels.
Packaging:
Carton, Wooden Pallets, Polywooden case, or as your requirement.
Application:
Transmission equipment in corrosive environments such as petrochemical industry, pickling industry, hot-dip galvanizing industry, etc., replace conventional bearings.